Journal of Engineering Research
Innovation and Scientific Development

Document Type : Research Paper

Authors

1Olalekan Ogunbiyi,  2Lambe Mutalub Adesina,  3Daniel Abayomi Ajala,  4IsaacOnimisi Yusuf, 

1. 1  Electrical and Computer Engineering Department, Kwara State University, Malete, Kwara State, Nigeria
2. 2  Electrical and Computer Engineering Department, Kwara State University, Malete, Kwara State, Nigeria
3. 3  Electrical and Computer Engineering Department, Kwara State University, Malete, Kwara State, Nigeria
4. 4  Electrical and Information Engineering Department, Landmark University, Omu-Aran, Kwara State, Nigeria

doi https://doi.org/10.61448/jerisd12237

Abstract

This paper presents the design, sensor selection, circuitry, firmware development, and testing of an ultrasonicbased digital height meter. An Atmega328 microcontroller is used in the design to handle sensor measurements as it investigates the utilization of HC-SR04 ultrasonic sensor technology. Firmware was developed in the Arduino IDE environment, and the sketch was uploaded to the microcontroller. The designed circuit was constructed on a Veroboard, and the casing was designed for convenience of use. Ultrasonic digital height meters are more accurate, dependable, and quick when compared to hospital meter rules. The apparatus was mounted at a height of 2 meters to ease the measurement of humans. Results from the measurement of nine people were compared with those of the hospital scale, and a percentage error of 0.55% was obtained. A digital height meter can be a very useful instrument for many different applications, including medical, educational, engineering, and surveying, with careful planning and implementation.